• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • WinPwn 2.0 Released


    cmw has released WinPwn 2.0 - you can now jailbreak your 2.0 iPhone/iPod Touch/iPhone 3G in Windows easily.

    The WinPwn site is up and down with the intense traffic, but here's the post, in case you can't get it to load...

    WinPwn 2.0

    - Support for both 1.1.4 and 2.0

    - Custom Image Support

    - Custom Payload Support

    - 3g iPhone support


    2.0 How to:

    - 1) First create a custom IPSW using the IPSW Builder.

    - 2) Click "Ipwner" and browse for the custom IPSW that you just created. This will pwn itunes and allow you to flash
    Custom IPSW files via DFU mode

    - 3) Once you have pwned Itunes, put your phone into DFU mode. If you don't know how to do this click
    Here.

    - 4) Once you are in DFU mode Itunes will pop up and then you can hold shift and click restore and browse to your custom IPSW file.


    Done!
    Important Notes
    Remove Winpwn 1.0 completely if you have it installed. Installing over the top of WinPwn 1.0 will cause problems.
    Make sure you have the latest version of iTunes ( Currently 7.7)
    If you already have service with AT&T do not activate or install Youtube Fix

    Thanks again for all those who supported me. WinPwn was made possible by PlanetBeing, Squpix and the dev team ( Especially Wizdaz, MuscleNerd, Gray, Pumpkin, bgm, roxfan ). I will be updating WinPwn with some better features and upgrading the credits and help sections over the next few days.

    Much love
    cmw
    Here's a ModMyI.com mirror for ya of the file (here's a non-member one), or you can grab it from RapidShare.

    Thanks to the dozens that sent this in.

    Also, cmw says there seems to be issue with Cydia on some XP machines, and he will be releasing a fix tomorrow.

    Edit Poseidon: Here is a nice guide written by theiphoneproject. I'm sure we'll have one up soon...

    WinPwn 2.0 Guide


    The new release 2.0.0.3 is out which should fix the Cydia/XP bug along with some others listed

    Here's some more useful info on firmware files:

    Quote Originally Posted by skillzdan
    for the new winpwn, you need to make sure you're using the right firmware for your phone or it will be buggy / cause problems.

    there is one firmware for the 3g (which winpwn recognizes and doesnt allow unlock) and there is one for the 1st gen which winpwn will recognize and allow unlock. you should put this in the post so people can download the correct firmware.

    here is link to both.

    iPhone 3g firmware:
    http://appldnld.apple.com.edgesuite....7_Restore.ipsw

    iPhone first generation firmware:
    http://appldnld.apple.com.edgesuite....7_Restore.ipsw
    This article was originally published in forum thread: WinPwn 2.0 Released started by Kyle Matthews View original post
    Comments 999 Comments
    1. 97vrsix's Avatar
      97vrsix -
      OK so then lets try this...Or ask this please..

      When in advanced options...What should i have checked? I am a T-mo user in the Us...The phone i bought from someone it was jailbroke, and running 1.1.4...Dont know if it is 3.9, or 4.6...

      Also what state should my phone be in? Should i uninstall all my app's i downloaded with the installer on my phone? Bring it back to factory? then try the build?

      I have re-installed the 2.0.0.2 and did the drop to run as xp, even took off account controls from Vista...no go...when i IP tunes it will shut down with error...

      SO again what should i check off, i know Youto, cydia, the bootloading immages, then what options? Should i wipe?
    1. bluemax189's Avatar
      bluemax189 -
      well running winpwn as an admin doesnt seem to work at all. looks like some vista users are just gettin plain lucky here.
    1. Sn4key's Avatar
      Sn4key -
      Hey guys,

      So I've just been reading all along here but haven't had the *bawls* to jailbreak my iPhone 3G because I don't wanna mess anything up since all my stuff is important in there..

      Couple of things worth mentioning that I didn't see answers for some of the questions in here that I figured out...

      1. There are 2 different Firmware Files to download (1 for an iPhone 1st gen, 1 for an iPhone 3G). When you load each Firmware file, winpwn does say what type of iPhone you should load... There is iPhone1,1_2.0_5A347_Restore.ipsw (for 1st gen iPhones) and iPhone1,2_2.0_5A347_Restore.ipsw (for 3G)... Notice the 1,2 on the 3G file...

      2. The question on why the Advanced Tab has items grayed out and only Activate and no Wipe available to check is the type of Firmware you try to load.. If you have an iPhone 3G, since we can't unlock the 3G yet, the Baseband checkboxes and below are grayed out.. since those items are involved in unlocking the phone.. If you load up the Firmware for 1st Gen iPhones, you see all the boxes available. You will know if you loaded the correct Firmware when you click to browse .ipsw; it says "Make sure you connect an iPhone" or "Make sure you connect an iPhone 3G!"

      So that's that.. I went far enough to build my Custom ipsw but don't want to go ahead until it's all done and fixed..

      Also a question of my own.. What would "No Wipe" do? If it means leaving the phone at its current state and jailbreaking it, it's nice because I don't wanna have to re-sync and re-set all the settings on the phone.. Or is it something else?

      Thanks in advance!
    1. Rated_R's Avatar
      Rated_R -
      Running Vista Ultim. Followed directions to a T. Downgraded to iTunes 7.5. Did everything suggested in this post. Still not jailbroken. I'm waiting for iLiberty or something along those lines. There are too many bugs in this program.

      Great effort. I know it takes time for the developers to do this stuff. Just never works for me.
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by 97vrsix View Post
      OK so then lets try this...Or ask this please..

      When in advanced options...What should i have checked? I am a T-mo user in the Us...The phone i bought from someone it was jailbroke, and running 1.1.4...Dont know if it is 3.9, or 4.6...

      Also what state should my phone be in? Should i uninstall all my app's i downloaded with the installer on my phone? Bring it back to factory? then try the build?

      I have re-installed the 2.0.0.2 and did the drop to run as xp, even took off account controls from Vista...no go...when i IP tunes it will shut down with error...

      SO again what should i check off, i know Youto, cydia, the bootloading immages, then what options? Should i wipe?
      follow this guide check all they have
      WinPwn 2.0 Guide
      i just didnt do the custom images... id try w/o them first you could always build a new one later just get it working
    1. Flyinb's Avatar
      Flyinb -
      I am using new release. go through the whole process and when I try to do a restore with the new ipsw, it extracts then gives me an iTunes error 6.

      Help please...1st gen - XP
    1. Jeckel's Avatar
      Jeckel -
      Quote Originally Posted by 97vrsix View Post
      OK so then lets try this...Or ask this please..

      When in advanced options...What should i have checked? I am a T-mo user in the Us...The phone i bought from someone it was jailbroke, and running 1.1.4...Dont know if it is 3.9, or 4.6...

      Also what state should my phone be in? Should i uninstall all my app's i downloaded with the installer on my phone? Bring it back to factory? then try the build?

      I have re-installed the 2.0.0.2 and did the drop to run as xp, even took off account controls from Vista...no go...when i IP tunes it will shut down with error...

      SO again what should i check off, i know Youto, cydia, the bootloading immages, then what options? Should i wipe?
      Do not worry at all about what's already on the iPhone. This is like restoring your iPhone, ALL of the apps will be wiped and you will start anew. (Don't worry about options and contacts, those are automatically backed up on your comp and will be synced back into the iPhone)

      I have had no troubles with Vista (32bit), you may need the 2.0 .NET update (get it from Microsoft), run as administrator (if you have that on) and you may want to restart or reinstall iTunes (then restart).

      As for options, since you want T-Mobile, don't activate, and it's ok for you to put on the Youtube fix (as that problem only applies to AT&T users). Boot images are entirely aesthetic, it's up to you to use them. Put on Cydia otherwise, what's the point? Without knowing bootloader data, cannot prescribe boot neuter options (some one else may know what to do off the top of their heads).
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by Rated_R View Post
      Running Vista Ultim. Followed directions to a T. Downgraded to iTunes 7.5. Did everything suggested in this post. Still not jailbroken. I'm waiting for iLiberty or something along those lines. There are too many bugs in this program.

      Great effort. I know it takes time for the developers to do this stuff. Just never works for me.
      Why downgrade itunes? it requires 7.7
    1. 97vrsix's Avatar
      97vrsix -
      Faseone, I did, i used that as a guied, figured ide ask and see if their was something missing..
      By the way, this is the crash log:
      Problem signature:
      Problem Event Name: APPCRASH
      Application Name: winpwn.exe
      Application Version: 2.0.0.2
      Application Timestamp: 4888edae
      Fault Module Name: StackHash_16dd
      Fault Module Version: 6.0.6001.18000
      Fault Module Timestamp: 4791a7a6
      Exception Code: c0000374
      Exception Offset: 000b015d
      OS Version: 6.0.6001.2.1.0.256.1
      Locale ID: 1033
      Additional Information 1: 16dd
      Additional Information 2: aaf42a96d4fa45dacd1bc14cef00e4c8
      Additional Information 3: 89cf
      Additional Information 4: b18a15183580b36b7286f11816fc3ed4

      thats from Vista..ultimate 32x...So any help would be great...As well if i should down grade to itunes 7.5 where do i get it, and what about my files on my computer now? Dont want to lose them...Any help?

      Or should we all just go to bed, and wait for a day or two for them to get hte bugs out? I really dont want to brick my phone.
    1. fearcevill's Avatar
      fearcevill -
      why cant I open winpwn? It keep saying error, the application faild to initialize properly(0xc0000135)

      Please help
    1. bluemax189's Avatar
      bluemax189 -
      if you want to try the old version of itunes go to Old Version of iTunes Download
    1. Jeckel's Avatar
      Jeckel -
      Quote Originally Posted by Flyinb View Post
      I am using new release. go through the whole process and when I try to do a restore with the new ipsw, it extracts then gives me an iTunes error 6.

      Help please...1st gen - XP
      You need it in DFU mode, NOT restore. Put it in DFU mode (while connected to the computer, the screen should be black, no image) and iTunes should pop up saying it needs to restore, THEN you select the custom firmware

      Quote Originally Posted by fearcevill View Post
      why cant I open winpwn? It keep saying error, the application faild to initialize properly(0xc0000135)

      Please help
      Get 2.0 .NET update from microsoft.
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by Flyinb View Post
      I am using new release. go through the whole process and when I try to do a restore with the new ipsw, it extracts then gives me an iTunes error 6.

      Help please...1st gen - XP
      your not properly going into DFU mode...

      hold top key slide to turn off..
      when off hold both home and sleep/wake button (do this for 10 sec ... count) then release the sleep/wake and keep holding home key.. itunes should recognize your iphone... Your iphone shouldnt turn on during this process.. if it does your not entering DFU properly
    1. Flyinb's Avatar
      Flyinb -
      I apologize i did DFU
    1. 97vrsix's Avatar
      97vrsix -
      So, t-mobile user's dont need to check off the activate square on the tool? I though we did for the fact that we could not do it other wise, or this would activate our phones for us?

      I guess i'm wrong...At any rate, no matter what file i use, i still get that error when i try to tel Itunes to Ip
    1. bluemax189's Avatar
      bluemax189 -
      seems the problem in vista ive noticed is that when itunes trys to prepare the iphone for restore, the iphone doesnt exit DFU mode. If you use the stock ipsw, it actually boots up the apple logo.......hmmmmmm
    1. bijju's Avatar
      bijju -
      Quote Originally Posted by Juno View Post
      I have a problem...
      When im trying to create ISPW im getting error -1
      Log:
      Code:
      2008-07-24 20:46:04 - This is winpwn ver.:2.0.0.1 RC1
      2008-07-24 20:46:04 - Apple Mobile Device Support Version 2.0.0.33 installed.
      2008-07-24 20:46:06 - Failed to load image catalog
      2008-07-24 20:46:06 - Failed to load payload catalog
      2008-07-24 20:46:13 - File from:C:Documents and SettingsAdministratorDesktopjjjjjiPhone1,1_2.0_5A347_Restore.ipsw
      2008-07-24 20:46:13 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
      2008-07-24 20:46:13 - Be sure to connect an iPhone!
      2008-07-24 20:47:54 - Preparing ipsw file.
      2008-07-24 20:47:54 - Failed to create directories The file 'C:Documents and SettingsAdministratorApplication Datacmwwinpwn2.0.0.1ipswbuildipswCustomCydia.tar' already exists.
      2008-07-24 20:48:04 - Preparing ipsw file.
      2008-07-24 20:48:09 - Failed to parse IPSW
      2008-07-24 20:48:09 - Ipsw builder (init) returned error:-1
      2008-07-24 20:48:36 - Preparing ipsw file.
      2008-07-24 20:48:40 - Failed to parse IPSW
      2008-07-24 20:48:40 - Ipsw builder (init) returned error:-1
      2008-07-24 20:48:48 - Preparing ipsw file.
      2008-07-24 20:48:53 - Failed to parse IPSW
      2008-07-24 20:48:53 - Ipsw builder (init) returned error:-1
      Quote Originally Posted by faseone View Post
      follow this guide check all they have
      WinPwn 2.0 Guide
      i just didnt do the custom images... id try w/o them first you could always build a new one later just get it working

      and use the new version of winpwn 2.0.0.2

      File: NEW_winpwn_2.0.0.2_Setup.rar
      DownloadLink:
      RapidShare: Easy Filehosting


      Mirror

      http://www.megaupload.com/?d=K21OVSR7
    1. faseone's Avatar
      faseone -
      Man I wish I knew all you people and could tell you to come over... I love helping people its just so hard blind..
    1. msb2008's Avatar
      msb2008 -
      heay guys i tried many guides but i was unable to upgrade to 2.0 using widows. but i found the following guide at iPhone-Hacks.com / Jailbreak and Unlock EDGE iPhone 2.0 With Windows Guide.
      in fact i just followed steps 5-end and ignored 1-4 and it worked like a charm. i did not needed to create any ipsw files or anything. so if you just want 2.0 this i think is the most simple way.
      the guide is below from their website:

      step 1: Use WinPWN 1.0 To PWN Your 1.1.4 iPhone. If you need WinPWN Get it here: WinPwn v1.0.0.3 RC1 Download



      WinPWN will ask for an IPSW you should use the 1.1.4 IPSW. Here is the link: iPhone Firmware v1.1.4 Download
      Step 2: Install BootNeuter (Available via the classic Installer listed as 1.0)


      Step 3: Run BootNeuter and have it Neuter your iphone. The selections you want are: 3.9 Bootloader, Neuter On, FakeBlank Off, Unlock On.


      Step 4: Make sure your iTunes version is at 7.7


      Step 5: Grab a pre-created IPSW Made with PWNAGE 2.0 Mac. You can grab one here: iPhone v2.0 Firmware Custom Download



      Step 6: Grab iLiberty here: iLiberty 1.3 Windows Download


      Step 7: Run iLiberty & Jump your iPhone into NORMAL Recovery mode This is the most straightforward way to get it into the proper restore mode


      Step 8: In iTunes Shift+Click the Restore button and find your custom IPSW Firmware file.


      Step 9: The restore occurs (You should see a crazy pineapple while its running on your iphone). Then you should see bootneuter automatically come up (this is pwnage unlocking, activating and jail breaking your iphone).


      Step 10:Enjoy 2.0 with AppStore & Cydia


      NOTE: DFU Mode did NOT work for me and a lot of other people so to be safe stick with normal restore mode.
      Offline
    1. GenghisPhlip's Avatar
      GenghisPhlip -
      @faseone: You got beer at your house?