• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • iPod Touch 2G Non-Tethered Jailbreak Guide for Mac
    This is a guide on how to jailbreak your iPod Touch 2G using a mac. Please note that it involves using command line so, you may find it difficult. If so, please wait for some until the DevTeam or some third party releases some guided software.

    1. Download the firmware files mentioned below:

    3. Download the rslite101.zip file from here and extract it.



    4. Open the extracted rslite folder and open CustomPackages folder inside it. Ctrl + Click on the CydiaInstaller.bundle and select Show Package Contents. It will display a file Info.plist.







    5. Download the PwnageTool and keeping the previous window open, Ctrl + Click on Pwnage Tool app and select Show Package Contents. Navigate to /Contents/Resources/CustomPackages. Ctrl + Click on CydiaInstaller.bundle and select Show Package Contents. A window will pop-up with some files in it. Copy the Info.plist file from previously opened window and paste it into this window. When asked about replacing the file, click Replace.













    6. Now, download this modded bundle file and extract it. Copy the extracted file named iPod2,1_2.2.1_5H11a.bundle





    7. Again Ctrl + Click on the Pwnage Tool and Select Show Package Contents. Navigate to /Contents/Resources/FirmwareBundles and paste the file copied earlier here. Close the window.









    8. Now, connect your iPod to the Mac and open Pwnage Tool app by double clicking it. Click OK in the pop-up window.





    9. Select Expert Mode and select iPod as the Device. Click the arrow button to go the next step.



    10. Let the software search for the 2.2.1 firmware file you downloaded above. Select the 2.2.1 firmware and click the arrow button to go to the next step.



    11. Double Click on General and Set the Partition Size if you like. Click the next arrow to get to the next option. This one is for iPhone, so again click arrow to go to next step. Click on Download packages and double click Open SSH to download it (optional). Click the arrow and select the checkbox infront of Cydia Installer to install Cydia. Again click the arrow. Select your boot logo and recovery logo or deselct the checkboxes to keep the default apple ones. Click the arrow, select build and again click the arrow to start building the custom firmware.















    12. Type a name for your custom fimrware and select the location to save it. It'd be better if you save this in the same folder as Pwnage Tool (named Jailbreak in this case) for convenience. After some time, it will show a pop-up asking your password, type it and click OK.







    13. Now, it will ask you if you have already pwned the iPod, click Yes (just do it!). After that, click OK on the next pop-up asking you to put the iPod in restore mode (though don't do it).







    14. Change the extension of custom firmware file from .ipsw to .zip and select Use .zip in the extension pop-up.











    15. Extract the zipped firmware and navigate to the /Firmware/dfu directory. From there, copy the file named iBSS.n72ap.RELEASE.dfu to a folder. Rename it to iBSS221pwn.dfu







    16. Navigate to /Firmware/all-flash/all_flash.n72ap.production/ directory and copy the file named LLB.n72ap.RELEASE.img3. Place it in the same folder as the previous file.





    17. Change the extension of 2.1.1 firmware file from .ipsw to .zip and select Use .zip in the extension pop-up. Extract the zipped firmware and navigate to the /Firmware/dfu directory. From there, copy the file named iBSS.n72ap.RELEASE.dfu to the same folder as before. Rename it to iBSS211.dfu















    18.Download the 24kpwn patch from here. Extract it to get the file LLB.n72ap.RELEASE.patch Place it in the same directory as the other three files.





    19. Now, download the LIBUSB for Mac package from here as per your OSX version. Extract the downloaded file to get libusb.pkg and double click to install it.





    20. Open Terminal in your Mac and navigate to the directory with patch and other files.



    21. Type in the commands below, line by line.

    Code:
    	bspatch LLB.n72ap.RELEASE.img3 LLB.n72ap.RELEASE.img3.new LLB.n72ap.RELEASE.patch
    	rm -rf LLB.n72ap.RELEASE.img3
    	cp LLB.n72ap.RELEASE.img3.new LLB.n72ap.RELEASE.img3
    	rm -rf LLB.n72ap.RELEASE.img3.new








    22. After that, copy the LLB.n72ap.RELEASE.img3 in the directory to /Firmware/all_flash/all_flash.n72ap.production/ directory of your extracted custom 2.2.1 firmware. Select Replace on the pop-up.







    23. Again open terminal and navigate to the main directory of your extracted custom firmware. Type the command below:

    Code:
    zip -r ../CustomFirmware.ipsw ./






    Now, you'll get a firmware file named CustomFirmware.ipsw in the same directory where the extracted custom firmware is.



    25. Put the iPod into DFU mode using our guide here.

    26. Now copy all the files (not folders) in rslite directory to the directory containing the patch and other files. Make sure iTunes is not running.





    27. Open Terminal and navigate to this directoy. Run rslite by typing the command ./rslite and issue the following command:

    Code:
    !iBSS211.dfu




    After this, the screen of the iPod will turn white.

    28. Now, again run rslite by typing ./rslite and type the commands below, one by one:

    Code:
    #pwn211ibss.txt
    !iBSS221pwn.dfu






    29. Now, iTunes will open and show a pop-up that iPod is in Recovery Mode. Click OK.



    30. Option + Click on the Restore button and navigate to the directory where CustomFirmware.ipsw is located and select it. Click OK and let iTunes will restore the iPod.



















    31. After some time, it will show a pop-up saying the iPod has been Restored, click OK.



    32. When the iPod will boot, it will be jailbroken and non-tethered as well! Go and play around with newly installed Cydia!



    Only the credit for making this tutorial goes to me. All the credit for the hack goes only to chronic, CPICH, ius, planetbeing, pod2g, posixninja, and co.

    P.S. I am not liable if you brick you iPod Touch though there are no chances of it, if you follow the above step by step. I have followed the same (duh!)
    This article was originally published in forum thread: iPod Touch 2G Non-Tethered Jailbreak Guide for Mac started by sayam View original post
    Comments 68 Comments
    1. DoerrFan's Avatar
      DoerrFan -
      Quote Originally Posted by Broomhead View Post
      You have received an infraction for being unnecessarily hostile/rude/insulting on the forums. While we understand that it is human to get angry we would like to keep this site as an open place for discussion. Not a place for hatred and insults. We invite you to continue using the site -- just please be a bit more courteous in the future.
      Aww I think i upset the little fella
    1. Broomhead's Avatar
      Broomhead -
      well that's his problem now
    1. n00neimp0rtant's Avatar
      n00neimp0rtant -
      Oh sh!t. Hope this guide goes on a diet soon.
    1. JStraitiff's Avatar
      JStraitiff -
      ya broom can u get rid of all of that fight including my post stoping it?

      its unnecessary to leave it up in the middle of this great guide
    1. asexynyfem's Avatar
      asexynyfem -
      I cant replace the info.plist in the pwnage tool custom folder. I keeps saying cydiainstaller.bundle cannot be modified.... Please help... I tried using an older version on pwnage tool but I wasn't able to build the custom firmware...
    1. joey2k's Avatar
      joey2k -
      Thanks Sayam
      Just tried it and for first time it works

      Good job..

      Btw you can find the libusb packages also here:
      TWAIN SANE Interface for MacOS X

      Cheers
      Joey
    1. Woldman's Avatar
      Woldman -
      I don't want to complain, but you can do it much more easier.
    1. asexynyfem's Avatar
      asexynyfem -
      which pwnage tool version are you using?
    1. h2a's Avatar
      h2a -
      Quote Originally Posted by Woldman View Post
      I don't want to complain, but you can do it much more easier.
      yeah... i'm with you. there were easier, more automated ways to do this the evening of the day this was posted.
    1. AppleIT's Avatar
      AppleIT -
      Save yourselves the time and go download Quickfreedom (Windows Only) People are killin me with the full detail installs of jail breaking just to get it to reboot the device when you want it to. Quickfreedom provides a simple fast jailbreak and allows you to hard reset and turn off the device and turn it back on (hence hard reset)
      -
      Google Search: Quickfreedom (First Result on Google) - Enjoy.
    1. Woldman's Avatar
      Woldman -
      Quote Originally Posted by asexynyfem View Post
      which pwnage tool version are you using?
      Type in by Google QuickFreedom it's much easier and quicker.
      Quickfreedom proceed the firmware and then you go to iTunes, hold SHIFT and click on the recover button. Then you get a map and you have to search for the firmware that quickfreedom has made for you. And after the installation. Voilá, your iPod 2G 2.2.1 is jailbroken. It's so easy if you just look a bit ferther.
    1. hollow0's Avatar
      hollow0 -
      I'm sure all of you will enjoy this link as it shows you what's included in the new iPhone 3.O software. All i can say is IT'S ABOUT DAMN TIME!!! Click the link below for details!

      Live from Apple's iPhone OS 3.0 preview event
    1. trolleywood's Avatar
      trolleywood -
      this seems simple enough, but it would be loads quicker to log into windows on my mac and do the exact same thing.
    1. dracofeles's Avatar
      dracofeles -
      I'm getting very close to succeeding, but a final problem stands in my way. These problems have been up on the forum already but lack a solution.

      First, the rslite wouldn't run through the terminal (error: cannot execute binary file), though downloading rslite from a different link on a different site (one optimized as "universal", i believe; I have a PowerPC) fixed this problem and ran just fine.

      Now that I've reached the next step, the FINAL step, I get the following error message when I try to restore the iPod using iTunes with the CustomFirmware.ipsw: "The iPod "iPod" cannot be restored. An unknown error occurred (1)."

      CAN ANYONE HELP? I have tried starting over completely several times, and nothing is working. (A point of interest: When i run the command "zip -r ../CustomFirmware.ipsw ./" it does not create the CustomFirmware.ipsw in my Jailbreak folder, but rather in the parent folder (my home folder), one folder above the Jailbreak folder. Does that matter at all?)

      If anyone has any helpful information, I would appreciate it GREATLY.

      Thanks....So Close!


      ******EDIT********

      My apologies, I figured out my error. The "zip -r ../CustomFirmware.ipsw ./" command should be executed from within the expanded Custom Firmware directory, not the Jailbreak directory. OOPS.

      I have fixed the error and jailbreak is SUCCESSFUL!!!

      Sorry for taking up space! Hopefully the specifics of my post will help others who have made a similar error!!!!

      Thanks to everyone for their hard work!
    1. biznaz07's Avatar
      biznaz07 -
      I get an Ihaz Failed message when i try to build my custom firmware. Any tips on how to get past this?
    1. niven's Avatar
      niven -
      hey
      i followed the instructions and still had problems
      wen i got to the stage in the pwnage tool were u make the .ipsw file and this thing came up that sed "sry i haz FAIL!"
      anyone got any ideas on wat went wrong.?
    1. smackswell's Avatar
      smackswell -
      Quote Originally Posted by biznaz07 View Post
      I get an Ihaz Failed message when i try to build my custom firmware. Any tips on how to get past this?
      Instead of using custom boot up images in pwnage tool (the pineapple and stevie jobs,) keep the default images. Worked for me.
    1. rmwpnb's Avatar
      rmwpnb -
      Might have something to do with OS X 10.4.11 because I'm getting the same message...Think I may have wasted my time...
    1. theone1007's Avatar
      theone1007 -
      I'm getting a message that says in Terminal that this file and directory does not exist. The part when you have to type the commands line by line.

      Nevermind, it actually worked. Just didn't see the "cd" in the Terminal screenshot. Thanks for the guide man! Worked to perfection for me. Although it took a bit of time, it was totally worth it. My bro is so happy right now
    1. danx73's Avatar
      danx73 -
      Hi,
      I am almost done with the whole installation.
      But when I try to run the ./rslite it gave me "Bus Error"