• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • Liberate Your iPhone 4


    If you've recently had an iPhone 4 serviced or replaced, you might have notice a tiny - very tiny - change in how the device is put together. Apple has switched over to a new tamper-resistant screw impossible to remove with anything but a proprietary tool. Now iFixit has come out with what they call the "iPhone 4 Liberation Kit" including a tool to extract the new screws so you can replace them with easy-to-remove Phillips screws.

    Kyle Wiens at iFixit noticed something odd when he flew to Japan to do the first iPhone 4 teardown. Rather than the standard #00 Phillips-head screw on the case, there was a mysterious, never-before-seen screw that's similar to the one used in the new MacBook Air. These screws were not used on US iPhones, but are starting to show up on devices returned for service. Wiens says that Apple calls this a "Pentalobular" screw in their service manuals. Unable to resist the obvious pun, he recently wrote a blog post calling the new tamper-resistant screw "a diabolical plot to screw your iPhone." Apparently Apple is also replacing the outer screw with the weird, flower-shaped Pentalobular in new MacBook Pros, iPhone 4s and MacBook Airs, and older computers are also getting the Pentalobular treatment when they are sent in for service. "We've spoken with the Apple Store geniuses tasked with carrying out this policy," Wiens writes, "and they are ashamed of the practice." Only the bulwark screws are Pentalobulars, so the intent is clearly to prevent third-party repair.

    In response, iFixit put together the iPhone 4 Liberation Kit, consisting of a driver that will let you extract the Pentalobular, standard #00 Phillips screws and a driver to go with them. The extraction tool is not a true Pentalobular driver, which is only available directly from Apple to authorized repair centers. It may damage the screw head when you remove it, but the intent is to get the Pentalobular out, throw it away, and replace it with a #00 Phillips to you can actually get back in if you need to.

    Apple partisans have attempted to defend this policy, suggesting that it's just Apple's desire for quality control, and that people could otherwise open their iPhones and mess them up, then "go to the Apple Store, complain that it stopped working, and demand a free replacement." But it's not a difficult thing to determine when someone taps a factory-installed screw: look at any product with "no user-serviceable parts inside." There's either a warranty seal or something on the screw itself that makes it tamper-evident. There's no need to use special hardware if all you want to do is determine if a piece of equipment has been opened.

    The motivation, as should be obvious, is financial. Apple takes a percentage of all service work done at authorized service centers, and using the Pentalobular means that all service work in iPhone 4s now has to be done by authorized service technicians who are the only people allowed to have Pentalobular screwdrivers, which they are prohibited from re-selling. "Apple sees a huge profit potential," Wiens notes. "A hundred dollars per year in incremental revenue on their installed base is a tremendous opportunity." The iPhone 4 Liberation Kit is just $9.95 from iFixit.

    Source: iFixit
    This article was originally published in forum thread: Liberate Your iPhone 4 started by Paul Daniel Ash View original post
    Comments 31 Comments
    1. trigun989's Avatar
      trigun989 -
      old news. they've been using those screws for at least 3-4 months. posted a thread about this 2 months ago. and the new screwdriver has been available for at least a month from other vendors
    1. powello18's Avatar
      powello18 -
      Lame.
      Yet why not just sell a "screw" driver piece that fits apples money grabbing screw as a separate item and 'coincidentally' sell a driver that fits perfect with the piece for apples screw.
      Screw apple over.
      Everyone will feel better.
    1. jdm.accord's Avatar
      jdm.accord -
      Noticed this the other day when working on an apple-replaced iP4. I just filed down a tiny flathead and it worked fine.
    1. jebakerii's Avatar
      jebakerii -
      Quote Originally Posted by trigun989 View Post
      old news. they've been using those screws for at least 3-4 months. posted a thread about this 2 months ago. and the new screwdriver has been available for at least a month from other vendors
      Agreed. I read about this in Mac|Life magazine, a PRINTED publication, and it was old news then!

      Here's another breaking news story! Apparently, if you hold the iPhone 4 with a certain grip, you may suffer from signal degradation! Maybe someone should post something about this.
    1. Dragonx151's Avatar
      Dragonx151 -
      Either way someones getting paid, I say rip it apart caveman style!

      Then demand a free replacement
    1. tomlangford001's Avatar
      tomlangford001 -
      Dunno bout anyone else but the screws on my ip4 are torx screws dunno wot size but their tiny
    1. zeroskater61's Avatar
      zeroskater61 -
      lol
      This is funny cause I fix a lot of iPhone, 3G, 3Gs, and iPhone 4 for some friends of mine who crack there screen or what ever... And just recently about 3weeks ago I fixed a friends iPhone 4 for her she had a 16GB by the way... But after the repair she demanded I damage a cable cause she wanted a completely new one so I just loosened up the speaker/chager cable AND I switched my iPhones 4 32GB sim card tray with her 16GB tray... Took it back told them the device wasn't or didn't want to charge... So right away he said we would get a new one took out the sim read the SN# off the tray an my i4 info came out he went to the back and came out with a fresh new 32GB not 16GB set it up added the sim and that was it lol... So we got away with getting a 16GB replaced for a 32GB.... (^,^) take that apple... Don't really care about my sim tray either since I will be selling my i4 once the i5 ever comes out...
    1. frail1's Avatar
      frail1 -
      Quote Originally Posted by zeroskater61 View Post
      lol
      This is funny cause I fix a lot of iPhone, 3G, 3Gs, and iPhone 4 for some friends of mine who crack there screen or what ever... And just recently about 3weeks ago I fixed a friends iPhone 4 for her she had a 16GB by the way... But after the repair she demanded I damage a cable cause she wanted a completely new one so I just loosened up the speaker/chager cable AND I switched my iPhones 4 32GB sim card tray with her 16GB tray... Took it back told them the device wasn't or didn't want to charge... So right away he said we would get a new one took out the sim read the SN# off the tray an my i4 info came out he went to the back and came out with a fresh new 32GB not 16GB set it up added the sim and that was it lol... So we got away with getting a 16GB replaced for a 32GB.... (^,^) take that apple... Don't really care about my sim tray either since I will be selling my i4 once the i5 ever comes out...
      I don't know why the sim tray would matter at all but congratulations on being a thief and committing fraud.
    1. AUZambo's Avatar
      AUZambo -
      I'd like to see a picture of these proprietary screws. Are we sure they're not just simple T6 torx screws? My MBP is riddled with them, but they are far from proprietary.

      It just seems the cost in designing and producing a completely unique screws would not be worth it. I mean, how many people voluntarily open up their iphones?
    1. exNavy's Avatar
      exNavy -
      If apple is that worried about people opening up merchandise that they legally own, then maybe they should go back to the case design of the first gen iphone. It was no gray area to know when someone opened one of those. It was also a major PITA to do it properly.
    1. jdm.accord's Avatar
      jdm.accord -
      Quote Originally Posted by AUZambo View Post
      I'd like to see a picture of these proprietary screws. Are we sure they're not just simple T6 torx screws? My MBP is riddled with them, but they are far from proprietary.

      It just seems the cost in designing and producing a completely unique screws would not be worth it. I mean, how many people voluntarily open up their iphones?
      They're not. They're tiny and 5-star torx-type (not typical 6). I scoured every hardware store locally (sears, harbor freight, lowes, home depot, autozone etc.) and online and couldn't find them besides international eBay sellers. This was 4+ months ago when I had a Japanese iPhone (the 5-star are standard on those). I ended up just filing down the smallest flathead I had and it worked fine.

      I recently got an iPhone 4 replaced and it came back with those screws as well.
    1. p3eps's Avatar
      p3eps -
      Quote Originally Posted by AUZambo View Post
      I'd like to see a picture of these proprietary screws. Are we sure they're not just simple T6 torx screws? My MBP is riddled with them, but they are far from proprietary.
      They are definitely not T6 screws. I have a new iPhone which has the new screws. Its serial number starts with XX101 - so it was manufactured in the first week of Jan 2011. Its like a torx screw, but has 5 points instead of 6.

      As above - its the same screws as the Macbook Air has. I work in an Apple repair center, and we've ordered a couple of these 'magical' screwdrivers from Apple for this purpose.
    1. jdm.accord's Avatar
      jdm.accord -
      Quote Originally Posted by frail1 View Post
      I don't know why the sim tray would matter at all.
      Since the iP4 doesn't display memory capacity on the back and the phone wouldn't turn on (he sabotaged it), the Apple rep got the serial # off the SIM tray (IMEI and serial are printed on the tray). The serial matched up for a 32GB (due to the switching scammer replacing it) so the rep replaced the 16GB with a 32GB.

      Clever, but devious.
    1. thetoothfairy's Avatar
      thetoothfairy -
      I love the technology today..... one company tries to stop people from doing things and another one makes a way for people to do what they want to do... its never going to end!
    1. Rob2G's Avatar
      Rob2G -
      Quote Originally Posted by frail1 View Post
      I don't know why the sim tray would matter at all but congratulations on being a thief and committing fraud.
      The sim try has the phones serial on it, and he did not steal anything. They gave it to him.
    1. Melech518's Avatar
      Melech518 -
      Umm, we have 10-20 of these drivers in every store...They are not only distributed by Apple. God gave us the gift of China, who will make ANYTHING for the right price..
    1. frail1's Avatar
      frail1 -
      Quote Originally Posted by Rob2G View Post
      The sim try has the phones serial on it, and he did not steal anything. They gave it to him.
      No, the moment he realized it was the 32gb they gave him (which i'm assuming was the intention when he replaced the sim tray) and he said nothing, he stole it. more specifically he scammed them, the theft was the result of the scam. any way you slice it, it's underhanded and dirty.
    1. trigun989's Avatar
      trigun989 -
      quit being an apple fanboy. iphones are overpriced
    1. thetoothfairy's Avatar
      thetoothfairy -
      Quote Originally Posted by trigun989 View Post
      quit being an apple fanboy. iphones are overpriced
      There is nothing wrong with fanboys. Please be polite.
    1. The Maestro's Avatar
      The Maestro -
      The extra 16GB of space he "stole" cost them like $25, I'm sure this billion dollar company is going to cease over that it's not that bad